I needed to use proxy once so i install it by export http_proxy="http://ip:port/" etc.and put it in .zshrc file, then im done i simple deleted those lines and reboot hyprland, but then i checked current environment trough env the proxy was there, and for some reason, it kept working.

Can someone help me remove it properly from the system?

Hello.

I'm using Fedora for over a year now. I really learned to love it, but unfortunately there are a few things I really dislike. In my setup, there are often some bugs or crashes, or it is running unstable.

This often happens after updating the system. Usually I would say this is a smaller problem, because you can just do the next update which are always coming quite fast. But in my case I'm working at sea and I typically do not have enough internet volume to do updates. So I'm stuck with the version I updated to.

Updating less regularly wouldn't work for me as well, because sometimes I find the bugs only after a few days or weeks.

This is the reason I'm looking for a new DE. It's important to me that it is stable. And because I got a 2 in 1 device, with a touchscreen, it would be nice if this is supported as well.

These limitations make it more hard for myself to find the right one. What would you recommend me?

Thanks a lot in advance for everyone answering!

Kind regards.

I have this question right now, so my younger brother really wants to play Fortnite on his garbage laptop. He has DDR4 8GB of RAM and an i3-1250U.

Now, the problem is that he thinks Windows is causing him to lose a lot of performance due to Windows taking 8GB of RAM, and I hate seeing him spend days of his life optimizing a laptop that can barely run Google with 5 tabs open. So, I wanted to help my brother, and I heard that Linux uses a lot less RAM and CPU like way way less. However, I also heard that Fortnite is not available for Linux, but maybe there is a certain OS or some method that allows him. Either way, I am also worried that something may happen from switching Windows to Linux because my brother is not on the technical side, to be honest. So, if anyone can say a way where my brother can switch to Linux and play Fortnite on it, then it would really help! Also, on a side note, I also wonder if there is a way to switch from Windows to Linux but still use Adobe software!

TL;DR: My non-technical younger brother wants to switch his low-spec laptop (i3-1250U, 8GB RAM) from Windows to Linux to save RAM and CPU usage, but we need to know if there is an OS or method to play Fortnite and use Adobe software on Linux. side note the adobe software is for me because i am also thinking to switch to linux

I've been thinking about it — as a current NixOS user, I wondered what the real and primary reason is that users don't switch from Arch, for example, to NixOS, especially given that NixOS is arguably the most distinctive system out there.

Hi all. I’ve been messing around with Linux for a few months and wanted to try LFS and I’ve run into a problem with installing GCC that I can’t seem to fix.

Running Ubuntu 25.10 as the host system on a VM.

I am currently on this page of LFS13.1 and I’ve compiled and installed GCC 16.2.0, but the last lines of code on this page aren’t working, saying that the directories for limitx, glimits and limity cannot be found. I am still in the build directory even though most troubleshooting guides say this tends to be the problem.

I’ve been following the book to the letter as well as watching a tutorial on YouTube (although the guy on the video is using a different host system but I assume that doesn’t matter) as I’m still a Linux noob so I’m not sure what is going wrong.

TIA for any assistance :)

I have been using artix linux on my thinkpad t440p, it’s working great but it got very bloated and i would like to switch to a non-systemd, musl distro. Void linux is an option but i don’t really enjoy using it, and i have been considering both Chimera and Alpine linux. I wanna use full disk encryption, and i know Alpine supports it but idk about Chimera. Also, i once tried FreeBSD since i don’t do gaming on that laptop, but i couldn’t get a graphical interface working; probably a skill issue.

Fellow linux enthusiasts, I spend a small portion of my life learning all sorts of tools one could use for linux, and the truth is, i now appreciate simplicty a lot more and respect the choices taken/given by devs on distros/software. I used to think using arch linux with a tiling compositor with neovim or emacs with other open source software was the only way to go.

Today, That's not the case anymore. I prefer to code in vscode, i prefer a standard terminal that handles everything gui, I also don't hate snaps. If there is a linux distro i can blindly pick for doing whatever I want, that's Ubuntu LTS for me.

I have learnt to understand that certain compromises are made when designing things and As long as I don't have to deal with them, I am fine.

So people who dream to leave windows and switch to linux can and should use whatever software they like and they have to rely on. If you can afford new hardware and buy a windows 11 machine, that's great, but for those who can't and stuck on windows 10, try a linux distro like Ubuntu, Fedora or CachyOS and see what you can do about it.

Yeah I have learnt shit ton of things from using arch and various other tools, but at the end of the day, I just wanna open a browser, read some yuri, write some notes and enjoy my life.

Let us learn to be grateful and enjoy the simple things in life. And if you do really struggle with something, then invest in other tools, not invest because someone says it can do wonders. or someone says its the better choice.

Also Please remember to enjoy, not live by the rules of others.

Edit: Some corrections on spelling

spotify+bluetooth+airpods doesnt work on mint for me- it goes laggy,just disconnects etc and im starting to get the shits.

I only have spotify open and it still acts up.

been using mint for about 8 months now.
but I want to listen to spotify and use my airpods while doing stuff.

anyone have any distro suggestions?

thx

Hello! I'm new to Linux so don't judge me here.

My sister gave me her old thinkpad from university which has ubuntu installed in it. I'm interested in installing a new linux os but I'm a bit worried about the sudo rights. She said that the uni she was the administrator and she had to request the sudo rights. If I install a new distro will any of this carry over?

Thanks in advance.

When I make a new directroy using mkdir I then have to change directory into it with the separate command cd. Is there a way I can do both create a new directory and change into it in a single line? I'm on Linux Mint 22.3 if it makes a difference.

mkdir folder
cd folder

I used to have kubuntu on same and drive as windows so grub launched first and i could select either os. But now i installed it on different ssd. And I can only select kubuntu/grub if i first go to bios and there is this special boot selector first. It doesnt show up inside boot order if i enter bios settings​

IDK if you understand but I am trying to emulate holding right click and draging the cursor via touchpad. Can I do that in Ubuntu? Is there an extension maybe? or a setting?

"[0.260689] platform MSFT0101:00: failed to claim resources 1: [mem Oxfed40000-oxfed40fff]

[0.260703] acpi MSFT0101:00: platform device creation failed -16"

I've been able to figure out the error is for TPM and ive seen a couple tutorials on how to disable it before installation, as well as suggestions to ignore error messages for it.

I'm most of the way through installing Linux from Microsoft 10. All I know how to to on this screen is pull up the list of built-in commands. I only know half of what these commands mean.

While I'm willing to go through and look up each command and give it a shot if i think it'll work, I'm hoping someone already knows what I need to do.

TIA

idk where to ask for help I'm sorry if this isn't it.

so i was downloading something and laid down a bit nd after an hour i decided to check and my pc wouldn't just display so i forced shut down and turned it back on again and this happened so i Unplugged the drive then rebooted just fine but the i experienced issues moving files and even launching games installed already in there which everything was working just fine a week ago. this happened mid update for a game since then i couldn't move files no more neither get the game to launch anymore. i couldn't even move the game because of this input/output error so i tried to fix it by running fsck.ext4 -y /dev/sdb1 for me and everything seemed geetin checked fine until the end then at the very bottom said the input/output error and system has been modified then i experienced the "mount: wrong fs type, bad option, bad superblock" which idk how to fix i used to fix it on NTFS with ntfsfix -d but now how can i get it back to work?

ps it's an external hardrive for games only doesn't have anything to do with the pc

So i was using windows my whole life from the 7 to the 11, and just a few days i installed some new windows and driver updates (as usual) but when finished the fans were going craazy asf not as usual at all and some random ass programs working in the background using almost 30% of the rams, and after doing some post feudal technological slavery work it went down to 20% but the fans are still running loud as hell and that was the The drop that overflowed the cup.

And i started thinking seriously to move to linux but i have to clarify some things before. I am moving to china to study and my laptop is my main machine so there is some responsability and what’s the alternative to the microsoft office programs because that’s part of my daily work, and in china there is programs that are used only in mainland china i am asking whether or not they can work normally on linux.

And there is just tooooo much distros to choose from, i searched and found the fedora kde which looked good actually so what would you advise me to use (not mint please lol)

Needs to natively run exe files

needs to have ability to customize it... without needing college level skill in terms of coding, or anything like that...

I also would love if it could come with a browser, so that I can easily install files accordingly....

It needs to be able to run minecraft bedrock and java, with support for curse forge and modrinth...

And it needs to be compatible with any graphics card, and a ryzen 5500x 64 bit cpu... and have integration for customizable multimonitor setups...

It needs to be able to run steam, it needs to be able to run itch.io, game jolt, etc.... basically I want this thing to be able to run almost any file, with windows level variety... but without the imposition that windows has....

I also don't have money for a usb storage stick... so if I could just install the operating system and have it, replace the windows I have installed... without needing it it would be ideal... if nothing else I can try to reformat an old hard drive and run it through a cable in usb.

Can anybody link me some decent distros that would work with these criteria in mind?

I don't have money to pay for distros... so i'm looking for something that's free. And has all these criteria.... ideally, it would be great if I could also change the logo to an arasaka logo...

​

Guys, I've been getting more and more disappointed with Windows and I ended up getting the idea to switch to Linux. The problem is that grub won't install on Mint, I've tried everything and I even sent it to a technician, but he couldn't do it either. He said he's going to try Ubuntu tomorrow, but I think it will give the same error. Does anyone know why this happens? I have two SSDs, a 480GB Kingston one and another 256GB NVMe that came with my laptop. I've already tried using Rufus, Ventoy, changing the USB drive, etc. Help

My PC is a Galaxy Book 2 with i3.

The error that appears is:

"Unable to install grub in dev/sda. This is a fatal error." When I try to run boot repair, the action is aborted

https://imgur.com/gallery/weird-error-QA5tQZi

I know what initially caused it, it was trying to install this clipboard manager. I could never get it to work with Fedora so I uninstalled it, but ever since this blotch of red error code pops up anytime the terminal does anything with curl.

It's not breaking anything, it's just annoying seeing it every time I try to update. I just know a real error is going to happen and I'm not going to see it because I'll just assume it's this.

EDIT: for better reading

fedorauser@FedoraHost:~$ sudo dnf upgrade -y

[sudo] password for fedorauser:

Updating and loading repositories:

gustavosett-clipboard-manager-source ???% | 0.0 B/s | 0.0 B | 00m00s

Curl error (77): Problem with the SSL CA cert (path? access rights?) for https://dl.cloudsmith.io/public/gustavosett/clipboard-manager/rpm/fedora/44/SRPMS/repodata/repomd.xml [error adding trust anchors from file: /etc/pki/tls/certs/ca-bundle.crt] - https://dl.cloudsmith.io/public/gustavosett/clipboard-manager/rpm/fedora/44/SRPMS/repodata/repomd.xml

An Curl handle error

gustavosett-clipboard-manager-noarch ???% | 0.0 B/s | 0.0 B | 00m00s

Curl error (77): Problem with the SSL CA cert (path? access rights?) for https://dl.cloudsmith.io/public/gustavosett/clipboard-manager/rpm/fedora/44/noarch/repodata/repomd.xml [error adding trust anchors from file: /etc/pki/tls/certs/ca-bundle.crt] - https://dl.cloudsmith.io/public/gustavosett/clipboard-manager/rpm/fedora/44/noarch/repodata/repomd.xml

An Curl handle error

gustavosett-clipboard-manager ???% | 0.0 B/s | 0.0 B | 00m00s

Curl error (77): Problem with the SSL CA cert (path? access rights?) for https://dl.cloudsmith.io/public/gustavosett/clipboard-manager/rpm/fedora/44/x86_64/repodata/repomd.xml [error adding trust anchors from file: /etc/pki/tls/certs/ca-bundle.crt] - https://dl.cloudsmith.io/public/gustavosett/clipboard-manager/rpm/fedora/44/x86_64/repodata/repomd.xml

An Curl handle error

Repositories loaded.

Nothing to do.

fedorauser@FedoraHost:~$