Has anyone who's purchased a Hammer BC08 been able to connect to a PPS or FPPS pool? All my shares are rejected from those pools. Solo pools work fine.

People compare $/kWh all day, but climate matters too IMO.

Same ASIC, same power rate:

Cooler site: less heat, fans don’t have to work as hard, lower chance of throttling.

Hot/humid site: more cooling needed, fans run harder, heat can become a bigger problem

That said, a well-built hot site can still beat a badly managed cold one. Airflow, dust, cooling and maintenance matter a lot.

Is this a big difference for you? or naaah?

Bought 4 of them years ago, they were obviously expensive / semi expensive at the time, been thinking about taking them all offline now they cost more to run than what they bring in, so I decided to just Google them and see what they were selling for..... I found $150 on ebay and Facebook market place and it just blew my mind. Obviously they aren't worth what they were when they were new, but $100? $200? That seems crazy. The cost on shipping them back is roughly $98 per miner

I feel like I'm going crazy and need validation lol

Hi. I have a miner hosted with CryptoCaddy but it has been offline for over a week. I had one general email communication with them but no followup as to what the issue is despite multiple emails. Is anyone else having trouble?

Hey guys, I have a BSB NerdOctaxe running at around 12 TH/s. It does reach 12 TH/s, but I'm pulling about 262 watts at the wall, which seems a little high to me.

I checked the miner settings and found:

• Core voltage: 1210 (default)
• Frequency: 740 (custom)

I'm trying to lower the power consumption while keeping as much hashrate as possible. Any advice on what settings I should try to reduce the watts at the wall? Maybe lowering the frequency or voltage? I'd appreciate any suggestions from anyone running a similar setup.

Is the Home Miner worth buying?

I'm starting to see machines like the S23 Hydro 3U at ~9.5 J/TH and the A4 Ultra Hydro at ~9.45 J/TH.

On paper, that’s a big efficiency jump compared with a lot of older ASICs. But replacing working hardware also means paying for the new machine, dealing with hydro infrastructure, and calculating how long the efficiency savings take to cover the upgrade.

For anyone who has actually upgraded recently: what did you replace, what are you running now, and did the power savings make it worthwhile?

Would be useful to compare some real-world numbers.

Still salty i had to send the first defective miner back to Hong Kong at my own expense. But the replacement is finally here and after seeing what the 1373 can do I’m done buying 1370 based miners.

This is a dual BM1373 home Bitcoin miner that can push up to 10 TH/s in one compact unit.

It uses a large 120mm cooler, oversized heatsink, and 8 copper heat pipes to keep both BM1373 chips cool at full 10T. No rear fan needed, and no extra upgrades required.

It comes with the 12v 240W PSU to give it enough headroom to hit 10 TH/s right out of the box, so there are no extra parts to source or modifications to make.

Lastly, It comes in a nice retail box ensuring the device arrives unharmed. Hammer miner has FCC and CE cert on all their devices as well which is important for a home device.

We tested the Thor P2 at the wall, not just from UI readings or manufacturer specs.

Low Power Mode
4.8 TH/s
50W at the wall
10.4 J/TH
35 dB

Normal Mode
6.8 TH/s
88W at the wall
12.9 J/TH
41 dB

Overclock Mode
10 TH/s
157W at the wall
15.7 J/TH
44 dB

Product page:
https://altairtech.io/product/thor-p2-bitcoin-miner/

For a home miner like this, would you run it in low power for efficiency or overclock mode for the full 10 TH/s?

Hi, I was doing maintenance on an S10J Pro+ and accidentally detached a heatsink from a chip.

Does anyone have any idea how to glue it back on? The AI told me to use thermal glue. Can anyone help me?

All machines can now be paid with over 300 different cryptocurrencies for free!

🌟 Just starting out? Grab one of our top-tier Home Miners to kick off your crypto journey!
USED:
- S21XPs Available
- L9 Out Of Warranty New In Box
- Used S21 Pros
- S21 Pros Out Of Warranty New In Box
- Used S19XP+ Hydros
And Many More!

Z15 Pro/ Non Pro firmware available FOR FREE!

https://805mining.com/product/805-mining-z15-firmware/

📈 Ready to scale up? 
We have availability at our co-hosting location, and have sites available for purchase! 🏠

⚡️ Got cheap power? 
Snag our bulk used machines for a fast ROI!

🏠 Looking for Hosting? 
We have hosting starting at 8c with more machines lowering the price!
Hydro starting at 8c.
Air starting at 7.75c.

🏭 Dreaming of your own crypt or ai farm? 

Book a consult or explore our turnkey solutions today! We offer Project Management, Site Maintenance, and custom tailor our solution to you!
SOLUTIONS WITH POWER ALL THE WAY DOWN TO 3.5C ALL IN!

Pushing Your Machine to the Max? We offer custom firmware and parts for your projects!
Installed for $60/machine
Custom Teardowns for immersion
805 Cryptoservices – Your one-stop shop for crypto success, at ANY scale! 💪

Visit us at 805mining.com

*DDP may not be available in all destinations or miner weight.
** Projected Revenue based off of time of ad creation. Revenue Fluctuates by the minute.

I tested the voltage range from 1100 mV to 1800 mV. Below 1800 mV, the actual ASIC voltage does not match the set voltage. It only starts to match the configured voltage when the setting exceeds 1800 mV.

I was completely puzzled by this for a long time. Then, at one point, I suddenly realized that the default voltage setting range is 1800–2600 mV. This could be the reason.

I'm currently at the Bitcoin Asia event and just saw a SEALMINER machine a relatively new company. One thing that caught my eye is the A4 Pro Air: 360 TH/s at 10.9 J/TH. That's crazy for an air-cooled miner! Has anyone tried their machines before? How was your experience?

I haven’t seen much on the internet about this miner I just paid for it. Someone do a review before I do

I came across a rewards coupon for $200 cash back for a $200 purchase on eBay and was wondering if there was anything worth buying for that price? I pay 13.5 cents per kWh, so as long as I am making more than that, I would be making some money. Plus, the hobby seems cool, so why not?

is here anybody who hosts miners in ethiopia / is mining in ethiopia? do you have any issues recently?

I'm testing a home solo miner with 2× BM1373 ASICs, and I noticed something strange with the voltage readings in the dashboard.

I set the Core Voltage to 1.00V at 400 MHz, but the dashboard shows a Current ASIC Voltage of 2.34V.

Normally, I would expect the actual ASIC core voltage to be reasonably close to the configured Core Voltage. It definitely shouldn’t be more than twice the configured voltage, which seems unusually high.

Has anyone encountered the same issue before, or have any idea what might be causing this?

Could this be related to the voltage measurement circuit, ADC scaling, or firmware configuration?

Any suggestions or experience with BM1373 voltage measurement would be greatly appreciated.

Choosing the right PDU really depends on what your mining setup needs most: lower cost, remote management, or higher output.

Here are three options we carry here at Altair Technology:

Argo Metered PDU - $129
Good budget option for a simple 30A setup. It gives you essential power delivery with LCD metering.

Virgo Smart PDU - $299
Better fit if you want remote network monitoring and control.

Leo Metered PDU - $249
Designed for higher-output home or garage setups. Our new LEO PDU supports up to 12,000W on a 50A NEMA 14-50 EV/Tesla-style outlet, which can be useful if you already have that power or outlet available.

I live in Brazil and want to buy a Bitmain Antminer S21, but I can't find any trustworthy companies that offer a warranty.

i got 40k euros cash, i live in a 3rd world country where electricity is very cheap!

What miners do i get? How much will i earn? How loud will they be? I need information please

One of our clients reached out about upgrading his fleet of S19s to S21 XPs with one cavait:

AIRCOOLED MINERS ARE WAY TOO LOUD.

So our clients ended up buying some foghashing C6 tanks and will be installing these stripped down S21 XPs into them. No need for a spoofer, they have our vnish installed so we can disable the fans, and now can be under and overclocked based off of the heat they need or are outputting.

Just thought the project was cool, and I’ll have them take pictures when they are installed.

Hi everyone,
I need some help optimization-wise for my NerdOctxe Pro (Bitronics)
.
I had to unplug my miner for a couple of hours to use the wall outlet for something else. Before turning it off, it had been running stable for almost 6 days with great metrics (shown in the first photo). After powering it back on with the exact same profile, my hashrate dropped and seems stuck (shown in the second photo).

Here is the comparison of my metrics:

BEFORE (Photo 1): 10,296 Gh/s | 650 MHz | 1.16 V | 152.0 W | Efficiency: 14.76 J/Th

AFTER (Photo 2): 9,117 Gh/s | 650 MHz | 1.16 V | 151.3 W | Efficiency: 16.60 J/Th

As you can see, the frequency (650 MHz), voltage (1.16V), and power draw (~151W) are practically identical, but I lost over 1 Th/s of performance and my efficiency worsened from 14.76 to 16.60 J/Th.

(Note: I tried bumping it up to 700 MHz temporarily to see if it would react, but it didn't help, so I went straight back to my original 650 MHz settings).

Has anyone experienced this drop after a clean power cycle? Is there any trick in NerdOS to force the ASIC to recalibrate or stabilize back to the ~10.2 Th/s mark, or do I just need to wait much longer?

Any advice would be highly appreciated. Thanks!

Is this reseller legit? Www.bibeam.com

Thanks

WHETHER CRYPTOMINING OR AI, AT HOME OR AT SCALE, 805Mining has you covered!

🌟 Just starting out? Grab one of our top-tier Home Miners to kick off your crypto journey!
USED:
- S21XPs Available
- L9 Out Of Warranty New In Box
- Used S21 Pros
- S21 Pros Out Of Warranty New In Box
- Used S19XP+ Hydros
And Many More!
📈 Ready to scale up? We have availability at our co-hosting location, and have sites available for purchase! 🏠
⚡️ Got cheap power? Snag our bulk used machines for a fast ROI!
🏠 Looking for Hosting? We have hosting starting at 8c with more machines lowering the price!
Hydro starting at 8c.
Air starting at 7.75c.
🏭 Dreaming of your own crypt or ai farm? Book a consult or explore our turnkey solutions today! We offer Project Management, Site Maintenance, and custom tailor our solution to you!
SOLUTIONS WITH POWER ALL THE WAY DOWN TO 3.5C ALL IN!
Pushing Your Machine to the Max? We offer custom firmware and parts for your projects!
Installed for $60/machine
805 Cryptoservices – Your one-stop shop for crypto success, at ANY scale! 💪
Visit us at 805mining.com
*DDP may not be available in all destinations or miner weight.
** Projected Revenue based off of time of ad creation. Revenue Fluctuates by the minute.

PLEASE REACH OUT DIRECTLY FOR QUOTES.